08毕业设计计说明书范本.docVIP

  • 2
  • 0
  • 约3.14万字
  • 约 43页
  • 2016-10-16 发布于贵州
  • 举报
08毕业设计计说明书范本

本科生毕业设计 伊嘉公路汤旺河至青山段 两阶段初步设计 系部名称: 土木工程系 专业班级:09-* 学生姓名: 指导教师: 职 称: 哈尔滨石油学院 二O一年五月 摘 要 本设计为伊嘉公路汤旺河至青山段建二级公路的初步设计,该公路全长6985.963m,双向双车道,设计车速为60,路基宽为,最大纵坡6%。全线共设置四个转角,10个变坡点。 本设计中,主要设计的项目包括:公路等级的确定、路线方案的拟定和比选、平面设计、纵断面设计、横断面设计、路基路面综合排水设计、水泥混凝土路面结构层设计、涵洞设计以及与各部分内容相关的表格和图纸。本设计是结合地形图及周边环境,根据《公路工程设计标准》、《公路路线设计规范》对道路进行综合设计。并在老师的指导和同学的帮助下,对设计中不妥之处进行修改和完善。 关键词:二级公路;纵断面;横断面;路面 Abstract The design for the IKA highway Tangwanghe to castle building two preliminary design section of highway,the highway is full-length6985.963m,bidirectional double driveway,design speed of 60km/h,,the maximum longitudinal slope of6%。All set up a total of four corners,ten grade change point。 In this design,the main design of the project include:road grade determination、route planning and selectiongraphic design,longitudinal design,cross-sectional design,roadbed and pavement drainage design,cement concrete pavement structure layer design,culvert design and with some of the content of the tables and drawings。The design is a combination of topographic map and the surrounding environment,according to the highway engineering design standardcode for design of highway routeon the road to carry out a comprehensive design。And the guidance of the teacher and students with the help of the design inadequacies,revise and perfect。 Key words:the two stage highway;longitudinal section;cross-sectional;pavement 目 录 第1章 绪 论 1 1.1 设计任务及内容 1 1.2 可行性说明 1 1.3 设计原始资料 1 1.4 路线的主要技术经济指标 2 1.5 方案论证与比较 3 1.6 本章小结 4 5 2.1 纸上定线和路线方案的确定 5 2.2 路线平面设计 6 2.3 路线纵断面设计 10 第3章 路基路面的设计 14 3.1 一般规定 14 3.2 路基横断面设计 14 3.3材料的要求 14 3.4特殊地基的处理 14 3.5 排水设计 15 3.6 横断面的绘出 15 3.7 水泥砼路面设计 16 3.8 水泥混凝土路面的各项指标 25 第4章 小桥涵设计 29 4.1 概述 29 4.2 小桥涵位置的选择 29 4.3 涵洞的设计原则 29 4.4 涵洞的设计要求 29 4.5 洞口型式选择 30 4.6 正交涵洞长度的计算 30 4.7 基底坡度的选择 30 4.8 本章小结 31 第5章 路线交叉 32 5.1 交叉概述 32 5.2 交叉口设计 32 第6章 环保设计 34 6.1 环保设计规范 34 6.2 本章小结 34参考文献 36 致 谢 37 绪 论1.1 设计任务及内容 依据给定的地形图进行纸上定线,完成伊嘉公路汤

文档评论(0)

1亿VIP精品文档

相关文档