《交通标志我来》教学设计.docVIP

《交通标志我来画》教学设计 曹丰国 教材分析： 本节课主要是应用画图软件中的各种工具，在掌握基本操作的同时，了解部分常用的交通标志，并且注意日常生活的交通安全。与单独介绍画图软件的各种工具的内容比较，本课综合了多种画图工具，进行综合使用的训练，通过计算机来尽量多的了解生活中的内容，以达到良好的教学目的。同时教师可以给学生宽松的内容，让学生可以自己创作交通标志，提高学生的想象创作能力。 教学对象：已基本学习完WINDOWS画图工具所有操作的三年级学生。 教学目标： 知识与技能目标：画图软件里的多个工具的使用(椭圆工具矩形工具曲线工具文字工具填充颜色透明处理等多个工具),过程与方法目标：通过协作、自主探究，寻找解决问题的方法，处理交通标志的绘制方法。教师要适当给予启发、点拨、讲授，同时注意学生自我素质的养成。 情感与态度目标：培养学生良好的素质修养，使学生学习做遵守交通规则的好少年。 spacing of 100mm. C, line line line nearby. D, spare wire unified terminal strip Terminal (terminal strip at the top of the vertical, horizontal terminal strip from the harness to Terminal Pai end at the beginning), length to ensure as far as Terminal and set aside. After e, form a wire harness, cable, line. When the line should be in the core wire for better identification and marking on the cards will be prepared in advance, alternate core core content for the cable numbering. F, finish line, according to the corresponding terminal locations, wire one by one from the bunch out, pulling line, should be kept parallel to each other and more. Core dark as possible, determined in accordance with specific conditions, it is required that: neat, beautiful, shapely, pleasing to the eye. 7.6.2 wiring technology, out of the core wire according to Terminal position, cut off the excess, with wire stripping pliers or electrician knife stripped of insulation, so that connection. Stripping should not damage the copper core. B, core wire on the oxide and chip-insulated electricians knife scrape. C, core processing has been completed, thread round long nose pliers in a clockwise direction. Circle with the screw in the direction of spin in the same direction, circle should be appropriate, it is best to slightly larger than the screws, bent round the circle and the length of root and appropriate so set screw is screwed on tight. D, when on the crimp-type terminals when wiring, threads do not have to bend. Insulating part should be careful not to press it into a Terminal, and make the loo