某型齿轮泵转子度、振动和接触应力分析.docVIP

  • 7
  • 0
  • 约4.46千字
  • 约 11页
  • 2016-10-17 发布于贵州
  • 举报

某型齿轮泵转子度、振动和接触应力分析.doc

某型齿轮泵转子强度、振动和接触应力分析 Rotor of a certain type of gear pump’s strength, vibration and contact stress analysis 叶峥? 魏大盛 石多奇 杨晓光 (北京航空航天大学) ?摘? 要: 本文在MSC.Patran有限元软件中,建立了齿轮泵转子的有限元模型,并通过MSC.Nastran和MSC.Marc求解器对齿轮泵转子系统的强度、振动和啮合齿间接触应力进行了有限元计算分析。该流程对齿轮轮系的分析具有一定的参考价值。 关键词: 齿轮泵 循环对称 自由模态 预应力模态 接触应力 MSC.Software Abstract: This paper build a FE-model of the rotor of a certain type of gear pump using MSC.Patran. After that, the paper analyses the strength, vibration and contact stress using MSC.NastranMSC.Marc. This kind of analyses processes can apply in other gear systems. Key words: gear pump,cyclic sym

文档评论(0)

1亿VIP精品文档

相关文档