基于零件参数化模的THG型斗式提升机设计.doc

沈阳建筑大学 毕业设计说明书 毕 业 设 计 题 目 基于零件参数化建模的THG型斗式提升机设计 学院专业班级 交通与机械工程学院 交通运输04-1班 学 生 姓 名 赵 锐 性别 男 指 导 教 师 王 历 职称 高级工程师 2008 年 6 月 10 日  摘 要 斗式提升机具有输送量大，提升高度高，运行平稳可靠，寿命长显著优点，其主要性能及参数符合JB3926----85《垂直斗式提升机》（该标准等效参照了国际标准和国外先进标准），牵引圆环链符合MT36----80《矿用高强度圆环链》,本提升机适于输送粉状，粒状及小块状的无磨琢性及磨琢性小的物料，如：煤、水泥、石块、砂、粘土、矿石等，由于提升机的牵引机构是环行链条，因此允许输送温度较高的材料(物料温度不超过250 ℃)。一般输送高度最高可达40米. 参数化设计是的一个重要思想产品开发初期，用CAD方法开发产品时零件形状和尺寸有一定模糊性，要在装配验证、性能分析和数控编程之后才能确定。这就希望零件模型具有易于修改的柔性。参数化设计方法就是将模型中的定量信息变量化，使之成为任意调整的参数。对于变量化参数赋予不同数值，就可得到不同大小和形状的零件模型。参数化设计可以大大提高模型的生成和修改的速度，在产品的系列设计、相似设计的应用价值。Abstract The bucket elevator has the advantages of big conveying capacity, high hoisting height, stable and reliable running and long working life. Its performance and parameter accord with JB3926—85 ‘Vertical Bucket Elevator’, which consults the international standard and advanced foreign standard and the towing circle chain accords with MT36—80 ‘High-Strength Circle Chain for Mine’. The machine is applicable for conveying the power, grain and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature with the special circle chain structure. The parametrization design is Pro/E important thoughts. Product development initial period, with CAD method develop products when the components shape and the size have certain fuzziness, must after the assembly confirmation, the performance analysis and the numerical control programming can determine .This hoped that the components model has the flexibility which easy to revise .The parametrization design method is changes a quantification the model in quota information ,causes parameter which it becomes adjusts willfully .Regarding changes the quantification parameter entrusts with the different value ,May obtain the different size and the shape components model. But in product development later period, thepar