煤矿副井提升机控系统设计.doc

毕 业 设 计 [论 文] 题 目： 煤矿副井提升机控制系统设计 学 院： 专 业： 自动化 姓 名： 学 号： 指导老师： 完成时间： 2013年5月29日 摘 要 副井主要用于提升和下放设备、提升废石、下放矿井矿物挖出后防塌陷的充填物等辅助材料，以及升降人员之用。因此对副井提升机的安全性要比主井提升机的安全要求要高的多。本课题介绍了国内外提升机系统的发展状况, 通过对比分析了国内提升机电控系统的不足,针对提升机的高可靠性要求采用PLC控制提出一种可靠性高的提升机操作保护系统。 课题对煤矿副井提升机控制系统设计进行论述，对主要电路图进行设计，并详细论述了对矿井提升机的保护设计，分别对过卷保护、墩罐保护、过载保护等进行设计，可以使系统可靠安全的运行。本设计采用现在比较主流的控制方式，用PLC作为控制器，变频器进行调速控制，使提升机按S型速度曲线进行运动，可使副井提升机平稳安全的运行。 关键词: 副井提升机,可编程控制器,变频器,可靠性,电控系统  Abstract Auxiliary shaft is mainly used for lifting and lowering equipment, improve waste rock, mine minerals dug defensive collapse decentralized fillings and other auxiliary materials, as well as lifting personnel only. So the auxiliary shaft hoist secure than the main shaft hoist safety requirements to be much higher. This topic describes the development of domestic and international situation hoist system, through comparative analysis of the domestic hoist control system is inadequate for the requirements of high reliability hoist PLC control with high reliability is proposed to enhance the operating protection systems. Topics for mine auxiliary shaft hoist control system design are discussed on the main circuit design, and discusses in detail the mine hoist protection design, respectively, over winding protection pier tank protection, overload protection, etc. designed to make the system reliable and safe operation. This design is now more mainstream controlled way, with the PLC as controller, inverter for speed control, the hoist speed by S-curve motion, auxiliary shaft hoist enables smooth and safe operation. Keywords: auxiliary shaft hoist inverter, PLC,electric control system, reliability  目录 摘 要 I Abstract II 1绪论 1 1.1 国内外提升