三立玉米播种机.docVIP

三立勺轮式免耕精量玉米播种机 Sanli Scoop wheel no-till precise seeder 一、用途与特点 1.Application And Characteristics （一）用途： 1 Application 该机与拖拉机配套作业，主要用于免耕地单粒精播或双粒精播玉米，可条施晶粒状化肥，一次完成开沟施肥、开种沟、播种、覆土、镇压等项等工序.。 The machine matches with tractor complete work, it is mainly used for zero till single grain essence sowing or double grain planting corn, but banding grain fertilizer, a complete furrow fertilization, open ditch, sow, cover earth, rolling etc etc.. 特点： 2 Characteristics 排种器播种精度高，粒数合格指数达到80%以上。 1. High precision metering device seeding, grain number of qualified index of 80% or more. 2.采用法向充种，可以高速作业，当株距不小于20厘米时作业速度可达到8公里/小时。 The method for charging, can high speed operation, when planting distance not less than 20 cm operation speed can reach 8 km/hour. 穴距精确，幼苗分部均匀，竞争小，个体优势能够充分发挥，作物生长旺盛，产量高。 The hole is apart from the precise, uniform seedling division, competition is small, can give full play to the individual advantage, crop growth, high yield. 各行传动轴连成一体，统一驱动，转速一至，传动动力大，即使其中一行的地轮偶然打滑，也不影响该行正常播种。 .All the shaft into an organic whole, unified, driven speed one to, transmission power is big, even if one line of wheel accidentally slip, also does not affect the normal sowing. 排种器采用八速可调式排种器，各排种器自行控制株距。 Metering device using eight speed adjustable device, the device to control the planting distance. 6.变速箱操作手杆可以同时控制摆移轮径向摆和轴向移动，操作快捷方便，变速箱所有齿轮都选用优质钢材经过渗碳处理，各传动部件都选用了优质滚动轴承，性能可靠。 Transmission operator rod can simultaneously control pendulum is moving round the radial and axial movement, convenient operation, high quality steel materials are used for all gear transmission through carburizing processing, the transmission parts are use the rolling bearings with high quality, reliable performance. 机架距地面抬高，前后开沟器距离加宽，缓减了夏播麦秸堵塞机器现象。 Rack from the ground up, before and after the opener distance widened, ease the summer sowing wheat straw block machine. 选用了大排量排肥盒，加粗了输肥管，亩最大排肥量可达80公斤。 Choose the large displacement distributing box, the bold lose fat tube, mus largest fertilizer consumption of up to