SOLIDMODELING翻译.docVIP

SOLID MODELING实体造型 6.1 Application of Solid Models实体模型的应用? In mechanical engineering, a solid model is used for the following applications:在机械工程中，一个实体模型被用于以下应用： 1、 Graphics: generating drawings, surface and solid models图形：生成图纸，表面和实体模型 2、 Design: Mass property calculation, interference analysis, finite element modeling, kinematics and mechanism analysis, animation, etc.设计：质量计算、干涉分析、有限元建模、运动学及机理分析、动画等。 3 、Manufacturing: Tool path generation and verification, process planning, dimension inspection, tolerance and surface finish.制造业：刀具轨迹的生成和验证，工艺设计，尺寸检验，公差及表面处理。 4 、Component Assembly: Application to robotics and flexible manufacturing: Assembly planning, vision algorithm, kinematics and dynamics driven by solid models.组件组装：应用于机器人和柔性制造：装配规划，视觉算法，运动学和动力学模型的驱动。 6.2 Solid Model Representation实体模型表示? There are three different forms in which a solid model can be represented in CAD:有三种不同的形式，其中一个实体模型可以表示在计算机辅助设计：? ·Wireframe Model线架模型 ·Surface Model曲面模型 ·Solid Model实体模型 Wireframe Models: Joining points and curves creates wireframe models. These models can be ambiguous and unable to provide mass property calculations, hidden surface removal, or generation of shaded images. Wireframe models are mainly used for a quick verification of design ideas.线框模型：连接点和曲线创建线框模型。这些模型可以是模糊的，无法提供质量的计算，隐藏的表面去除，或产生的阴影图像。线框模型主要用于快速验证设计思路。 Surface Models: Surface models are created using points, lines, and planes. A surface model is unable to identify points that do not lie on the surface, and therefore, the moment of inertia, volume, or sections of the model cannot be obtained. A surface model can be shaded for better visibility. Surface models are used for modeling surfaces of engineering components.表面模型：使用点、线、面创建表面模型。表面模型是无法识别的点，不在于表面上，因此，该时刻的惯性，体积，或部分的模型不能得到。一个表面模型可以被遮蔽，以更好的能见度。表面模型被用于工程部件的建模表面。 Solid models: Solid models are the most preferred form of CAD models. and represent unambiguous image of a component. A solid model can be used to analyze the moment of inertia, mass, volume, sections