ADA4528.docx

特性低失调电压：2.5 μV(最大值)低失调电压漂移：0.015 μV/°C(最大值)低噪声5.6 nV/√Hz(f = 1 kHz，AV = +100)97 nV p-p(f = 0.1 Hz至10 Hz，AV = +100)开环增益：130 dB(最小值)共模抑制比(CMRR)：135 dB(最小值) 电源抑制比(PSRR)：130 dB(最小值)单位增益交越：4 MHz增益带宽积：3 MHz (AV = +100) -3 dB闭环带宽：6.2 MHz 单电源供电：2.2 V至5.5 V 双电源供电：±1.1 V至±2.75 V轨到轨输入和输出单位增益稳定应用热电偶/热电堆 称重传感器和桥式传感器精密、超低噪声、轨到轨输入输出(RRIO)、零漂移运算放大器ADA4528-1/ADA4528-2引脚接线图NIC18NIC–IN2ADA4528-1 7 V++IN3TOP VIEW6OUT(Not to Scale)V–45NICNOTES-001094371. NIC = NO INTERNAL CONNECTION.图1. ADA4528-1引脚配置(8引脚MSOP)NIC18NIC–IN2ADA4528-17V++IN3TOP VIEW6OUT(Not to Scale)V–45NICNOTES-1021. NIC = NO INTERNAL CONNECTION.2. CONNECT THE EXPOSED PAD TO09437V– OR LEAVE IT UNCONNECTED.图2. ADA4528-1引脚配置(8引脚LFCSP)关于ADA4528-2引脚接线及有关这些产品引脚连接的更多 信息，请参阅“引脚配置和功能描述”部分。精密仪器电子秤医疗仪器手持式测试设备概述ADA4528-1/ADA4528-2均为超低噪声、零漂移运算放大器，具有轨到轨输入输出摆幅。这两款器件的失调电压为2.5 μV，失调电压漂移为0.015 V/℃，典型噪声为97 nV p-p (0.1 Hz至10 Hz，AV = +100)，因而非常适合不容许存在误差源的应用。ADA4528-1/ADA4528-2具有2.2 V至5.5 V的宽工作电源电压范围、高增益、出色的CMRR和PSRR特性，是低电平信号VOLTAGE NOISE DENSITY (nV/√Hz)100VSY = 5VAV = 1VCM = VSY/21011101001k10k100k1M10MFREQUENCY (Hz)图3. 电压噪声密度与频率的关系09437-063精密放大应用的理想之选，如位置和压力传感器、应变计、医疗仪器等。ADA4528-1/ADA4528-2的额定温度范围为?40°C至+125°C 扩展工业温度范围。ADA4528-1和ADA4528-2提供8引脚 MSOP和8引脚LFCSP两种封装。欲了解有关ADA4528-1/ADA4528-2的更多信息，请参考应 用笔记AN-1114：最低噪声零漂移放大器具有5.6 nV/√Hz电 压噪声密度。Rev. DDocument FeedbackInformation furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Speci cations subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.表1. ADI公司零漂移运算放大器产品组合 1超低微功耗低功耗16 V30 V类型噪声(20 A)(1 mA)工作电压工作电压单通道ADA4528-1ADA4051-1AD8628AD8638ADA4638-1AD8538双通道ADA4528-2ADA4051-2AD8629AD8639AD8539四通道AD86301欲选择最新的零漂移运算放大器，请访问。One Technology Way, P.O. Box 9106