以P123为模板制备氧化钛介孔氧化铝复合体材料性能研究.docVIP

以P123为模板制备TiO2/介孔Al2O3复合体材料及其光催化性能研究 摘要 本研究以三嵌段高分子表面活性剂EO2P070EO20(P123)为 模板剂，异丙醇铝和钛酸丁酯为无机源，在酸性水热条件下采制得氧化钛/介孔氧化铝复合体材料，并对其可见光催化性能进行了研究。结果表明掺杂Ti原子介孔氧化铝，介孔复合体材料的比表面积和孔径分别达450m2/g和11.7nm光催化效果。 P123;光催化;氧化钛/介孔氧化铝材料  Synthesis and photocatalytic activity study of TiO2/Mesoporous Al2O3 composite by using P123 as template Abstract In this paper, TiO2/ mesoporous Al2O3 composite was synthesized by using Block copolymer of ethylene oxide with propylene oxide (EO20PO70EO20, P123) as template, aluminum isopropanol and butyl acetate titanate as inorganic precursor under acid condition via hydrotherm