6款包装盒折法细图解-折纸.docVIP

6款包装盒折法详细图解－折纸 6款包装盒折法详细图解－折纸 礼物包装样式1： 礼物包装折法详细图解－折纸 礼物包装样式2： 礼物包装折法详细图解－折纸 礼物包装样式3： 礼物包装折法详细图解－折纸 礼物包装样式4： 礼物包装样式5： 礼物包装折法详细图解－折纸 礼物包装样式6： 礼物包装折法详细图解－折纸 取消 equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power equipment requirements, facilitate the introduction of cables and ducts. 6.2.9 outdoor cabinets, make appropriate rain cover. 6.3 for the Cabinet fixed the leg bolts should use the original Cabinet. 6.3.1 electrical distribution cabinets should be welded without special instructions, weld enclosure bottom corners, with base length in 20mm-40mm, welding should be solid, welding in the welding parts with preservatives. 6.3.2 electrical power