学士学位论文---150万吨中厚板设计说明书说明书.docVIP

内蒙古科技大学 本科生毕业设计说明书 题 目：设计年产150万吨的中厚板厂 专 业：材料成型及控制工程 班 级：成型07-2班 摘要 本设计是以包头地区为条件，设计了年产量150万吨的中厚板厂，分析了在包头地区建造新的中厚板厂的可行性和必要性。结合设计条件及年产量要求完成了10个产品品种、10个产品规格的产品方案表和金属平衡表。以钢种为Q345B的连轧坯（200mm×2100mm×3800mm）轧制中厚板，典型产品规格为25mm×3300mm， 第一章为中厚板的国内外发展概况及建厂可行性分析，总结了当前世界上中厚板生产技术的先进水平，包括设备、技术及理念等，然后详细进行了建厂的可行性分析；第二、三章是对设计任务、生产品种及工艺流程进行了确定，制定了产品方案和生产工艺；第四、五章介绍了车间平面布置，确定设备的间距、生产流线及设施面积的计算；第七章进行力能参数的计算，内容包括轧制表的计算、工具设计及强度校核；第八章进行主辅设备选择，根据产品的要求，合理的确定设备参数；第九章是对车间产量进行了计算，包括各设备的生产能力、车间平均小时生产能力及车间年生产能力；第十章编制了技术经济指标，确定了车间内各项设备、原材料、动力等利用程度的指标。最后根据设计参数，绘制出了车间平面布置图。 关键词：中厚板；车间设计；生产工艺 Abstract This design that take the Taotou area as a condition， has designed the annual yield of 1，5 million tons new medium and heavy plate factory， analysed the feasibility and necessity of the construction of a new plate factory in Taotou area. Combined design conditions and the requirements of annual yield， the design completes 10 product varieties， 10 product specifications and metal balance sheet table. A cogged ingot (200mm × 2100mm × 3800mm) of Q345B is used for the rolling medium plate， and a typical product specifications is 25mm × 3300mm. This design involves eleventh chapters， the first chapter describes the products， equipments and the developing situations of main medium plate enterprises about the internal and external. The plans of the products， the sorts of the products， the process flow and technological demand are described in the second and third chapter. The fourth and fifth chapter is about the plane dispose of the workshop， fixing the space between flown line and the equipment areas. The senventh chapter is about the calculation of the steel rolling， equipment capability， tool designing and intension verifying. The eighth chapter is about the choice of mostly and assistant equipment which according to equipment parameter. The outputs of workshop， which involve the average output of per hour and the whole year outputs were calc