在Word203文档中设置字符间距.docVIP

在Word2003文档中设置字符间距 所谓字符间距是指Word2003文档中两个相邻字符之间的距离，通常采用“磅”作为度量字符间距的单位。用户可以根据实际需要设置字符间距，即按照用户规定的值均等地增大或缩小被选中文本字符之间的距离。在Word2003文档中设置字符间距的步骤如下所述： 第1步，打开Word2003文档窗口，选中需要设置字符间距的文本。在菜单栏依次单击“格式”→“字体”菜单命令，如图2009111003所示。 图2009111003 选择“字体”菜单命令 第2步，打开“字体”对话框，切换到“字符间距”选项卡。在“间距”下拉列表中选择字符间距的类型（例如选择“加宽”）。在“磅值”文本框中选择或输入字符间距的数值（例如“1.5磅”）。设置完毕单击“确定”按钮即可，如图2009111004所示。 图2009111004 在Word2003“字体”对话框中设置字符间距 小提示：用户还可以通过“字体”对话框中的“缩放”下拉列表缩小或放大文本。用户既可以在下拉列表框中选择Word2003中已经设定的缩放比例，也可以在文本框中直接输入所需的百分比。需要注意的是，缩放字符只能在水平方向上对文本进行缩小或放大。默认情况下，字符以行基线为中心且处于水平标准位置。用户可以在“字体”对话框中的“位置”下拉列表中选择“提升”或“降低”选项，用以设置文本的梯形效果，如图2009111005所示。 图2009111005 在Word2003中提升或降低字符 distribution, control and protective screen (cabinets, boxes) and console and other metal frame and base should be grounded, or zero. 6.3.3 other control panels, the protection plate fixing screw should be used with the base. 6.3.4 where vibration place, enclosure damping measures, usually in the Cabinet with the thick rubber base pad 10MM, screwed. 6.3.5 all connection between the enclosure using bolts for fixing 6.3.6 check between the screw distribution, control and protective screen (cabinets, boxes) and console and other metal frame and base should be grounded, or zero. 6.3.3 other control panels, the protection plate fixing screw should be used with the base. 6.3.4 where vibration place, enclosure damping measures, usually in the Cabinet with the thick rubber base pad 10MM, screwed. 6.3.5 all connection between the enclosure using bolts for fixing 6.3.6 check between the screw distribution, control and protective screen (cabinets, boxes) and console and other metal frame and base should be grounded, or zero. 6.3.3 other control panels, the protection plate fixing screw should be used with the base. 6.3.4 where vibration place, enclosure damping measures, usually in the Cabinet with the thick rubber base pad 10MM, screwed. 6.3.5 all connection between the enclosure using bolts for fixing 6.3.6 check between the screw