毕业设计(论文)－连接螺帽注塑模具设计.docVIP

PAGE 29 摘要 注塑模具是将受热融化的材料由高压射入模腔，经冷却固化后，得到成形品的一种模具。该模具适用于形状复杂部件的批量生产，是重要的模具之一。　工作过程大致可分为以下6个阶段“合模-注射-保压-冷却-开模-制品取出”，上述工艺反复进行，就可连续生产出制品。 在本次设计中，首先选择了塑件的材料，选择了适合的注塑机，接着确定了型腔数目和分型面，接着设计模架的大小、浇注系统、导向机构、脱模系统、温度调节系统、排气系统和建模仿真。经过本次设计，较好的达到了设计要求。 关键词：塑料模具 镶件 分型面 注射 Abstract Injection mold is one of the mold which is heated by the materials will melt into the cavity and get the forming product after cooling and curing.The mould are suitable for mass production of complex shape parts and is an important one of the mould.Working process can be roughly divided into the following six stages Shut the mould - injection - pressure-keeping - cooldown - open mold - products take out,the above process can be repeated, continuous produce products. In this design, the first chose plastics materials,chose suitable injection machines, then determine the cavity number and parting surface,the size of the formwork design, pouring system, steering mechanism, parting system,temperature control system， exhaust system and modeling simulation.After the design, I meet the design requirements better. Key word:the plastic mold;the parametrization;inlays;inject 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc29118 摘要 PAGEREF _Toc29118 I HYPERLINK \l _Toc15707 Abstract PAGEREF _Toc15707 II HYPERLINK \l _Toc14452 第1章 绪论 PAGEREF _Toc14452 1 HYPERLINK \l _Toc29322 1.1 塑料注射模具的简介 PAGEREF _Toc29322 1 HYPERLINK \l _Toc12949 1.2 国内外塑料模具的发展现状 PAGEREF _Toc12949 1 HYPERLINK \l _Toc5695 1.3 塑料模具的发展趋势 PAGEREF _Toc5695 1 HYPERLINK \l _Toc29646 1.4 本课题的研究目的和意义 PAGEREF _Toc29646 2 HYPERLINK \l _Toc9645 第2章 模具的总体设计 PAGEREF _Toc9645 3 HYPERLINK \l _Toc17366 2.1 塑料制品的设计 PAGEREF _Toc17366 3 HYPERLINK \l _Toc21435 2.1.1 塑件材料的选择 PAGEREF _Toc21435 3 HYPERLINK \l _Toc5087 2.1.2 丁腈橡胶性能分析 PAGEREF _Toc5087 3 HYPERLINK \l _Toc14121 2.1.3 丁腈橡胶的成型条件 PAGEREF _Toc14121 3 HYPERLINK \l _Toc18583 2.2 注塑机的选择 PAGEREF _Toc18583 4 HYPERLINK \l _Toc28442 2.2.1 制品的几何属性 PAGEREF _Toc28442 4 HYPERLINK \l _Toc17690 2.