毕业设计外文翻译基于PLC的交通灯设计.docVIP

毕业设计（外文翻译） 英文题目 PLC-based design of traffic lights 中文题目 基于PLC的交通灯设计 系 （院） 自动化系 专 业 电气工程与自动化 学生姓名 学 号 2009022388 指导教师 职 称 讲 师 二〇一三 年 六 月PLC-based design of traffic lights Abstract: One kind of traffic light control system using programmable logic controller (PLC), via software control traffic lights run automatically. In the system, the original line is the program instead of the relay, programmable logic controller (PLC) system hardware and software resources to be fair use. Normal operation and emergency transport for a detailed description and from the East and West emergencies can be mutually linked. Traffic signal systems and two seven-segment digital display in the countdown order; also discussed in detail the wiring of the hardware and PLC ladder. Traffic lights at the crossroads of the remote monitoring system design configuration software MCGS, real-time monitoring of traffic lights, greatly improving the reliability of data transmission. At the same time, we can configure the traffic lights to change the status of photographs. Keywords: switching power,supply protection, circuit system design 1. Introduction With the social development and progress, traffic flow becomes increasingly important. On the one hand, too many crossroads, more and more vehicles, which are causing serious traffic congestion. On the other hand, in the limited time it is necessary to maintain the vehicle and pedestrian fast and safe. Therefore, one kind of traffic light control system design, can be used to display time countdown, with computer controlled real-time data. In addition, the configuration technology for real-time images that reflect the traffic lights, understand the historical crossroads of work to get traffic lights visualization. T