橡胶轮胎硫化机热盘加工专用机床设计.docVIP

摘 要 本课题设计的是橡胶轮胎硫化机热盘加工专用机床。其来源于江阴昌明橡胶机械有限公司。在总体设计中：根据合同中的产量要求，来计算工件的加工时间以及专用机床的进给速度等。接着从工件下手，图纸和工件材料来计算出动力部件所需要的切削力和切削功率等，从而来合理的选择出所需要的动力部件。然后根据切削力以及工件的重量来设计进给系统的结构布局。根据工件体积重量等相关资料，合理设计床身、立柱、横梁等部件。绘制焊接图和总装配图。本设计在保证加工效率和质量的前提下，尽可能的减少专用机床的制造成本，将效率、效益最大化。 关键词：；； Abstract Combination machine is a high efficiency special purpose machine, there are specific conditions of use, not in any case, it can receive good value for money, in determining the design of the machine, it should carry out specific economic and technical analysis. Machining of parts with a mechanical product, there is usually a variety of technology programs, different programs have different economic effects, technical and economic factors that affect a lot, and sometimes technical indicators advanced solutions, economic indicators are not necessarily advantageous, therefore, need on the technical, economic indicators for comprehensive evaluation, comprehensive views of the majority to elect the economic effect evaluation optimization program, you can decide if satisfied. Design of this project is a rubber tire vulcanizing machine hot plate special machine. It derives from Jiang Yin Changming Rubber Machinery Co., Ltd.. In the overall design: the production requirements under the contract, to calculate the machining time and the special machine tool feed speed. Then start from the workpiece, workpiece material drawings and to calculate the dynamic component of the cutting force and the cutting power required, so as to select a reasonable part of the power needed. Then according to the weight of the workpiece and the cutting force to design the structure and layout of the feed system. Volume weight of the workpiece and other relevant information, the rational design bed, column, beams and other components. Plot welding drawings, and assembly drawings. This design process to ensure the efficiency and quality of the premise, as far as possible to reduce the manufacturing