大学毕业设计—数字电子钟的设计与实现.docVIP

毕业设计说明书 数字电子钟的设计与实现 专业 自动化 学生姓名 班级 B自动化 学号 0 指导教师 完成日期 203年6月日  毕业设计说明书 独创性声明 本人声明所呈交的毕业设计说明书是本人在导师指导下进行的研究、设计工作后独立完成的。除了文中特别加以标注和致谢的地方外，说明书中不包含其他人己经发表或撰写过的研究成果。对本文的研究所做贡献集体和个人，均己在说明书中作了明确的说明并表示谢意。本人完全意识到本声明的法律后果由本人承担。 毕业设计说明书作者签名: 日期: 年 月 日 指导教师签名: 日期: 年 月 日 数字电子钟的设计与实现 摘 要单片机，极高的性价比，、发展快单片机体积小、、、、环境、抗干扰能力强。，，单片机已广泛机电一体化设备工业自动化控制、智能仪器仪表、电力电子、自动检测、家用电器等方面次毕业设计通过对它，以89C51芯片为，的电路，简设计了一个的，它由4.5V直流电源供电，通过数码管，从而学习、设计、开发软硬件的能力。 ：单片机；STC89C51；电子时钟；数码管 Design and implementation of digital electronic clock Abstract: The SCM was born in the 1970s, because it has a very high price, the more important is its broad range of applications, and the development speed is relatively fast, so much the majority of professionals of all ages. SCM relatively smaller, and very light, development of more simple, cheap, environmentally basically no excessive requirements, and more importantly, it has good flexibility and stability, the ability of anti-jamming special strong. Because of a combination of the above so a bit microcontroller, so the current domestic purposes, SCM has been widely used by businesses, which are more prominent in mechatronics equipment, industrial automation and control, smart instrumentation, power electronics, automatic detection , household appliances and so on. SCM has many series, and 51 single-chip microcontroller is therefore the most representative one. In this graduation project will be through its comprehensive understanding to STC89C51 chip-based, coupled with the associated circuit implementation, the simple design of a digital electronic clock, which is powered by a 4.5V DC power supply, through the digital the accurate time display, through the relevant key on the time to adjust time. Thus designed to improve through this study, design, development hardware and software capabilities. Keywords: Microcontroller; STC89C51; Electronic clock; Digital pipe 目 录 1 概述 1 1.