ANSYS电场分析例(非常好).docVIP

ANSYS静电场分析例常好 As shown below, you can use GUI menu paths to perform the example analysis of creating a Trefftz domain to solve an open boundary problem in electrostatics. Step 1: Start the Analysis Activate the ANSYS launcher. Select the ANSYS simulation environment, choose your license, and click Run. When the Graphical User Interface is fully active, choose Utility Menu File Change Title. A dialog box appears. Enter the title text, Sphere to Infinity Capacitance Click on OK. Choose Main Menu Preferences. The Preference dialog box appears. Click Electric on. Click on OK. Back To Top Step 2: Define Analysis Parameters Choose menu path Utility Menu Parameters Scalar Parameters. The Parameters dialog box appears. Type in the parameter values shown below. (Press ENTER after entering each value.) n = 5 r1 = 100 r2 = 300 r3 = 125 Click on Close to close the dialog box. Back To Top Step 3: Define Element Types Choose Main Menu Preprocessor Element Type Add/Edit/Delete. The Element Types dialog box appears. Click on Add. The Library of Element Types dialog box appears. In the scrollable fields, click on (highlight) Electrostatic and 3D Tet 123 (SOLID123). Click on OK. ANSYS returns you to the Element Types dialog box. Click on Close to close the Element Types dialog box. Back To Top Step 4: Define Material Properties Choose Main Menu Preprocessor Material Props Electromag Units. The Electromagnetic Units dialog box appears. Select the User-Defined option button and click on OK. A Electromagnetics Units text entry box appears. Enter 8.854e-6 for the free-space permittivity (μMKSV units) and click on OK. Choose Main Menu Preprocessor Material Props Material Models. The Define Material Model Behavior dialog box appears. In the Material Models Available window, double-click on the following options: Electromagnetics, Relative Permittivity, Constant. A dialog box appears. Enter 1 for PERX (Relative permittivity), and click on OK. Material Model Number 1 appears in the