SYD-201A沥青针入度试验器.docVIP

SYD-2801A针入度试验器 GLMGS 2002年06月06日 一、产品简介 One, product introduction 本仪器是根据中华人民共和国标准GB/T4509 《石油沥青针入度测定法》、GB/T269《润滑脂和石油脂锥入度测定法》及中华人民共和国行业标准JTJ052-2000《公路工程沥青及沥青混合料试验规程》中的T0604《沥青针入度试验》中的技术要求和有关规定设计制造的，主要适用于沥青针入度的测试和润滑脂（或石油脂）锥入度的测试。本仪器也可用于固体细粒、粉剂、胶体、冻体等材料，以及乳酪、糖胶、牛油、麦其淋、奶油、发酵体等食品原料检验，在食品工业、交通公路工程及其他工业部门都可广泛应用。 The instrument is based on the standards of peoples Republic of China GB / T4509 determination of needle penetration of petroleum asphalt, GB / T269 grease and petrolatum-Determination of cone penetration and the standard of peoples Republic of China JTJ052-2000 highway engineering asphalt and asphalt mixture test procedures in T0604 in asphalt penetration test the technical requirements and the relevant provisions of the design and manufacture, mainly applied to asphalt penetration test and grease ( or petrolatum ) cone penetration test. The apparatus can also be used for solid particles, powder, colloidal, jelly and other materials, as well as the cheese, sugar, butter, cream, butter, fermented wheat somatic foods such as raw materials inspection, in the food industry, highway traffic engineering and other industries are widely used. 二、技术指标 Two, technical indicators ★测量范围：0～600针入度； Of measuring range: 0 ~ 600 penetration; ★针入时控装置：可分别选择5、8、10、12、30、60秒，时间误差小于±0.1秒； Of a needle into the time control device: can respectively select 5, 8, 10, 12, 30, 60 seconds, time error is less than 0.1 seconds; ★分辨率：0.01㎜； Resolution: 0.01 mm; ★针入精度：±1针入度； The accuracy of needle into the needle penetration: + 1; ★玻璃水槽：为硬质玻璃缸。 Of glass sink: hard glass cylinder. ★标准针：2.5±0.05g, 符合GB/T4509、T0604的规格要求； Of standard needle: 2.5 + 0.05g, with GB / T4509, T0604 specifications; ★标准锥体：102.5±0.05g, 符合国家标准GB/T269的规格要求； Of standard cone: 102.5 + 0.05g, in line with national standards GB / T269 specifications; ★升降支架：粗调、细调双重升降调节机构,便于针尖对准试样平面； Of lifting bracket: coarse, fine double lifting regulation mechanism, convenient needle alignment specimen plane; ★其它：配有冷光源和放大镜，方便使用和操作。 On