本科毕业论文-智能电饭煲设计.docVIP

摘 要 本设计以 SH69P42 单片机为核心，通过热敏电阻把温度信号转变成电压信号，再经 A/D 转换把电压信号变成的数字信号，然后由 CPU 处理进而去控制继电器，达到对发热盘的温度控制工作。本电饭煲采用波浪式起伏加热模式，通过微电脑控制，模拟人工炊煮。轻轻按下六个按键，便能完成煮饭、快煮、煮粥、煲汤、保温五大烹调功能和一个预约功能，给消费者带来便捷的生活享受。 关键词：SH69P42 单片机；调功；传感器；吸水点；沸腾点；焖饭点 Abstract This design is based on SH69P42 micro single-chip computer , use the quick temperature resistance to change the temperature signal into the voltage signal, and then chang the voltage signal into digital signal by ADC , at last the CPU deal with it and control the relay electrical mechine ,so as to control the heat coil.The electrical r