Fdisk分区教程(XP2003用).docxVIP

一、全新硬盘分区1. 制作带有MS-DOS的Windows PE。推荐老毛桃的U盘PE，制作U盘启动系统。2. 进入cmos /bios 设置U盘启动（光盘PE设置光盘启动）重启电脑进去PE3. 选择MS-DOS系统进入DOS界面，待出现X:\提示符时，敲入FIDSK回车。全部显示为X:\FDISK然后回车。 4. 在回车后，紧接着会出现如下程序执行前的询问界面： Your computer has a disk larger than 512 MB. This version of Windows includes improved support for large disks, resulting in more efficient use of disk space on large drives, and allowing disks over 2 GB to be formatted as a single drive. IMPORTANT: If you enable large disk support and create any new drives on this disk, you will not be able to access the new drive(s) using other operating systems, including some versions of Windows 95 and Windows NT, as well as earlier versions of Windows and MS-DOS. In addition, disk utilities that were not designed explicitly for the FAT32 file system will not be able to work with this disk. If you need to access this disk with other operating systems or older disk utilities, do not enable large drive support. Do you wish to enable large disk support (Y/N)...........? [Y] FDISK是可供选择支持大硬盘分区FAT32 小分区FAT16使用大分区的请选择：[ Y ] 则硬盘以FAT32格式分区。支持的系统有，Windows98 ，windows 2000/2003 ，Windows XP / SP2/SP3 （SP3已经支持NTFS格式）。对于现在而言FAT32格式分区不能复制4G以上的单个文件。不使用大分区的请选择：[ N] 则硬盘以FAT16格式分区。支持的系统有Windows 95 /NT以及更古老的Windows 3.0 ,DOS等 。（估计已经绝版了，如果有用的不要忘记硬盘为Fat16）FAT16格式分区所能复制的单个文件更小，几乎没用 敲入[Y]后，你会看到如下FDISK主选菜单。 FDISK Options Current fixed disk drive: 1 （当前硬盘驱动器：1） Choose one of the following: （选择下面任一项来执行） 1. Create DOS partition or Logical DOS Drive（创建DOS分区或逻辑DOS驱动器 ）2. Set active partition （设置活动分区 ）3. Delete partition or Logical DOS Drive （删除分区或逻辑DOS驱动器 ）4. Display partition information （显示分区信息 ）Enter choice:[1]（输入选择: [ ]敲入你执行的选项前面的顺序号即可执行相应操作。） 5. 选择[1]来创建OS分区或逻辑DOS驱动器了。敲入[1]回车，这时你会看到： Create DOS Partition or Logical DOS Drive Current fixed disk drive: 1 （当前硬盘驱动器：1 ）Choose one of the following: （ 选择下面任一项来执行） 1. Create Primary DOS Partition （ 1.创建主DOS分区 ）2. Create Extended DOS Partition （2.创建扩展DOS分区） 3. Create Logical DOS Drive(s) in the Extended DOS Partition （.在扩展DOS