模流分析样板资料.pptVIP

Weld lines The color lines are possible weld lines. 体积收缩率 如图所示体积收缩很均匀，请注意保压设置。 Volumetric shrinkage Volumetric shrinkage is balance show by picture, please attention the setting of packing. 冷却过程 Frozen series 缩水痕估算 Sink marks estimate 注射压力及锁模力变化 注射压力变化 锁模力变化 Injection Pressure Clamp Force Clamp Force Pressure at injection location 翘曲变形 - X方向 X方向的变形如图所示,变形不均匀。 Deflection – X direction Deflection of X direction is imbalance. 翘曲变形 - Y方向 Y方向的变形如图所示,变形均匀。 Deflection – Y direction Deflection of Y direction is balance. 翘曲变形 - Z方向 Z方向的变形如图所示,变形均匀比较大。 Deflection – Z direction Deflection of Z direction