钉磨机床设计分解.doc

No： Abstract For proceeds to discards the tire the recovery makes use of, processing the solid tire that farm machinery use.But design the whets the machine bed, the whets the machine bed is an among them a work to belong to the appropriation machine bed, it is, in the solid tire that process preface.According to the covariance, the current whole world reaches annually 2,200,000,000 about 4 of hundred million, Western Europe is near 2 of hundred million,1 of hundred million ： Japan[1 5] of ～ .How to will discard the old tire recycling and reduce the deal turns, harmless turn, not only relate to the this important and social problem in environmental protection, but also still relate to keep on developping this world strategy problem.So to for proceeds to discard recovery that old tire the machine processes to proceed excellent turn the design is a business enterprise to have great significance, abroad for example the United States etc. nation concerning similar machine bed design pretty many they concerning discard tire recover the exploitation pretty many. Key word:Discarding the tire Pole spreads to move the part Takes to spread to move the part Presses the roll part  目 录 摘要 …………………………………………………………………I Abstract ……………………………………………………………II 目录 ………………………………………………………………III 第1章 钉磨机床的机构方案………………………………………1 1.1 钉磨机床的研究目的和意义 ………………………………1 1.2 钉磨机床的特点 ……………………………………………1 1.3 钉磨机床的用途和应用领域 ………………………………1 1.4 总体方案确定 ………………………………………………1 1.5 钉磨机床的结构方案确定 …………………………………2 1.5.1 钉磨头部分 ……………………………………………2 1.5.2 蜗杆传动部分 …………………………………………3 1.5.3 带传动部分 ……………………………………………3 1.5.4 齿轮传动部分 …………………………………………3 1.5.5 压辊部分 ………………………………………………3 第2章 钉磨头部分的结构方案设计………………………………4 2.1 钉磨头的结构方案 …………………………………………4 2.1.1 钉磨头的结构方案确定 …………………………………4 第3章 蜗杆传动部分的设计 ……………………………………5 3.1 蜗杆传动的类型 ……………………………………………5 3.2 蜗杆传动的失效形式 ………………………………………6 3.3 蜗杆刚度计算和蜗轮轮齿强度计算分析 …………………8 3.3.1 蜗轮