本科毕业论文---电话机座电池盖三维造型及模具设计.docVIP

学号： 常 州 大 学 毕业设计（论文） （2014届） 题 目 电话机座电池盖三维造型及模具设计 学 生 张聪 学 院 机械工程学院 专业班级 成型101 校内指导教师 苗乃明 专业技术职务 讲师 校外指导老师 专业技术职务 二○摘 要关键词 Design of Injection Mould 【Abstract】and the processing project. The designer focuses on the design and account work of parting-surface ， the choice of the runner system ，the design of the core ，the design of the cavity and the design of mould overall structure . Pro-Engineer3.0 and CAD 2007 is applied to the whole design to complete the whole of the mould design ,including the mold assembly drawing ,the three dimensional figure and the floor plan of parts。This work makes the designer know more about the skills of mould design and deepen the knowledge he studied in the University. Theory with practice ，integrated use of the knowledge learned molds, machinery, mechanics, graphics and other aspects. In addition ，this paper also introduced the present situation of the injection mold at home and abroad ，the gap between the mould industry in China and the mould industry abroad ，prospects for development of the mould industry and the future trend of mould industry。 【Key Words】mould design；Pro/ENGINEER 3.0；cad2007； plastics product； 目 录 摘要·········································································································································Ⅰ 目·········································································································································Ⅲ 一、············································································································· 1 1.1本课题研究的意义 ··································································································1 1.2国内外现状