本科毕业论文---ldo误差放大器频率技术分析与设计.docVIP

毕业设计（论文） 设计（论文）题目： 摘 要【关键词】 频率补偿 SMFFC  ABSTRACT In recent years, along with the continuous development of the process level and the deepening in the application fields of portable electronic equipments, the performance requirements of Low- dropout Linear Regulator(LDO) is becoming more and more rigorous. The future development trends of LDO are: lower cost, lower noise, lower power consumption, higher efficiency, higher integration, and wider range of application. The domestic development of LDO is behind the advanced international standards, because the IC industry started late. And the market shares of power management chips are mainly occupied by foreign companies. Therefore, there is important strategic meaning to master the basic knowledge of power technology, study the international advanced skills, and design new circuit structures which are practical. Due to the requirement of LDO, this paper mainly study the core of LDO, namely, error amplifier, emphasizing on frequency compensation analysis and research. Based on the existing compensation structures of three-stage error amplifier ,this paper introduces a kind of compensation called Single Miller Capacitor Feed-forward Frequency Compensation(SMFFC). What’s more CSMC 0.5um COMS technology is adopted, and circuits design and parametric simulation are accomplished through the spectre simulation tool. The design of circuit is done here to drive a 120pF load. When the power supply voltage is 2V,the GBW achieves 8.6MHz, the DC gain reaches to 95.44dB, the phase margin can be 60.7,the miller capacitor is only 2.51pF,and the power supply consumption is just 0.384mw. In chapter one, the basic construction and theory of LDO and the influence to LDO of error amplifier are interpreted in order to introduce the analysis of the error amplifier. In chapter two, on the one hand, the basic amplifier cells are studied and designed. On the another, the amplifier’s frequency compensation is analysized adopti