GSMPv3applicabilitytoL2CPdraftwadhwagsmpl2control课程.pptVIP

IETF 65 (L2C BOF) GSMPv3 applicability to L2CPdraft-wadhwa-gsmp-l2control-configuration-00.txtL2CP BOFIETF-65 Sanjay Wadhwa Juniper Networks Agenda Layer2 Control in Access Networks (L2CP) GSMPv3 applicability to L2CP GSMPv3 extensions for L2CP Adjacency Protocol Access-Line discovery Line Configuration Remote connectivity check “Transactional” Multicast Current Status L2CP : Layer2 Control Protocol in DSL Access Networks BNG (Broadband Network Gateway) Aggregation point for subscriber traffic. Serves as injection point for policy and IP QOS management in access/regional network. Acess-Node Terminates the “local-loop”. First point in the network where traffic is aggregated from multiple “local-loops” on to a single network (e.g. DSLAM in DSL access networks). Broadband Access Aggregation Network L2CP: Layer2 Control in Access Networks Control Plane required between BNG and Access-node for dynamic “QOS-related”, “service-related” and “subscriber-related” operations. Dynamic control protocol eliminates dependency on integration with a complex OSS system spanning multiple entities. L2C: Layer2 Control in Access Networks Desired control plane attributes: Simple Ease of implementation Time to market Light-weight Allow implementation on AN with limited control plane resources (CPU/memory) Extensible Possible to extend the protocol for use-cases relevant to access technologies other than DSL (e.g PON). Supports addition of new capabilities in a downward compatible manner. L2C: Layer2 Control in Access Networks Flexible Independent of underlying access/aggregation network (e.g. ATM or Ethernet). Supports transactional exchange Request/response model for BNG to communicate control decisions or request information from AN. Supports “asynchronous” notifications from AN to BNG. L2C: Layer2 Control in Access Networks Minimize configuration overhead and maximize automation of operation. OPEX reduction Supports configurable