Methodsofanalysis课程.pptVIP

Methods of analysis Step : 1.Select a node as reference node,and assign 1,2,…n-1 to the remaining nodes; 2.Apply the nodes equations to each nodes; 3.Solve the resulting simultaneous equations to obtain the unknown node voltages. eg2: Write the nodal equations of the circuit. eg3:Find I eg4:Write the nodal equations of the fig. Solution: Node analysis with voltage source there are two ways to deal with the questions: (1) If a voltage source is connected between the reference node and a non-reference node, then voltage of the non-reference node is equal to the voltage of the source. Un