07 动态RIP路由.ppt

Layer 3 of 3: Layer 3 adds router B, which receives the updated routing table from router?A. In turn, router B will perform its own process to update its routing table given this new topology update from router A. Distance vector updates occur step by step. Typically, a router sends updates by multicasting its table on each configured port, but other methods, such as sending the table only to preconfigured neighbors, are employed by some routing algorithms. Multicast is used by the RIP2, OSPF, and EIGRP routing protocols. RIP and IGRP use broadcast. The routing table can be sent routinely