Hardware Installation Checklist.doc.docVIP

Hardware Installation Checklist Purpose: To plan, design, schedule, install, and verify the computing hardware required to provide computer capabilities within the time frame specified. To coordinate with the vendors in equipment support. This checklist is used by the Hardware Installation Team or its equivalent. RECOVERY SITE Assemble at the designated site for a briefing on the extent of damages, escalation plan, and support required upon notification of a disaster by the Operations Recovery Management Team. Initials: Date: Time: RECOVERY SITE NOTIFICATION Verify the pending occupancy with the alternative recovery site, if required. Site Contacted: Contact: Date: Initials: Date: Time: RECOVERY SITE INSPECTION Inspect physical space availability at the alternative site and inform the Software, Communications, and Operation Team members of the assessment. ?Initials: Date: Time: Notes:  EQUIPMENT REQUIRED Review the Hardware/Software Inventory list found in Exhibit 2, Appendix to Chapter 11, Contingency Plan, to determine the equipment required. ?Initials: Date: Time: LIST OF EQUIPMENT REQUIRED SALVAGED EQUIPMENT Coordinate with the Damage Assessment and Salvage Team to obtain an inventory of usable and salvageable equipment. Initials: Date: Time:  ADDITIONAL EQUIPMENT Coordinate with the Administration Team in the procurement of any additional equipment required in the recovery process. Initials: Date: Time: LIST OF ADDITIONAL EQUIPMENT REQUIRED EQUIPMENT RETRIEVAL Retrieve the equipment, systems, and LAN configuration from the storage containers delivered by the off-site storage vendor. Initials: Date: Time: LIST OF EQUIPMENT TO RETRIEVE INITIAL CONNECTIONS Coordinate with the alternative site on the installation and connection of 5 temporary terminals to provi