《S7300与组态王通过工业以态网通讯》.docVIP

S7300与组态王通过工业以态网通讯 软件配置 1 Siemens Automation License Manager V4.0 + SP2 2 PC Adapter USB V2.0 3 S7-PLCSIM V5.4 4 S7-PCT V2.0 + HF3 5 SIMATIC NET PC Software V6.3 + Hotfix 1 6 STEP 7 V5.4 + SP5 + HF3 Chinese 7 组态王 Kingview 6.52 硬件配置 1 Power 307-1EA01-0AA0 2 CPU 315-2EH14-0AB0 3 网线（连接CPU和PC） 操作步骤 上述软件均已经安装成功，硬件连接完毕，PLC已通电。 创建项目 打开SIMATIC Manager，通过“文件-新建”创建一个新项目，命名为“S7300与组态王通讯”。 点击确定。 PLC硬件组态 2.1新建SIMATIC 300站点； 2.2添加Power模块和CPU模块； 双击硬件。添加插槽；在1号插槽添加电源模块，2号插槽添加CPU模块； 2.3 新建Ethernet，设置IP（本例中PLC设置192.168.0.1，PC设置192.168.0.2） 点击确定。硬件组态结束。点击“保存和编译”，然后下载到PLC。按提示操作。 3、PLC编程。保存并下载到PLC。 4、组态王 4.1 打开工程管理器，根据新建工程向导新建一个名为“S7300与组态王通讯”的工程，并保存； 4.2打开 “S7300与组态王通讯”；在板卡中添加新设备“S7300”。 4.3 在数据词典中添加变量start、stop、running 4.4组态画面 4.4.1新建画面“通讯测试”，点击确定； 4.4.2 添加按钮，修改文本内容，编辑动画连接，输入按钮“按下时”“弹起时”命令语言连接； 4.4.3保存画面，并切换到VIEW。 5、监视PLC与组态王，点击画面按钮，改变画面状态，PLC程序也有相应动作。 点击start指示灯变绿色，点击stop指示灯变红色。 S7300与组态王通过工业以太网通讯成功。 their own conditions to develop the correct road, the maximum to avoid investment risk, gain profit.(three) vigorously promote the brand. To establish brand awareness, awareness of the use of brand, brand value, brand acquisition performance, enhance the competitive strength. Concentrated manpower, careful planning, packaging and publicity of a number of unique, market influence and coverage of the brand, the implementation of key breakthroughs, to enhance the competitive strength, walking business road the competition of alienation and characteristics, the pursuit of stability and development of the market.(four) to promote the integration of resources. To further broaden their horizons, effective integration of resources within the group, the city resources, other industries and regional resources, mutual trust, mutual benefit, seeking win-win principle, in the framework of national policies and regulations, strict inspection and argumentation, legal consultation, examination and approval procedur