《基于SolidWorks组合夹具设计说明书》.docVIP

(镐京学院西安校区) 毕 业 论 文题目： 基于Solid Works组合夹具CAD的研究学 生：高 原学 号：院 （系）： 机电工程学院专 业：机械设计制造及自动化 指导教师：张 斌2012 年 6 月 5日 基于Solid Works组合夹具Modular fixture CAD Research Based on Solid Works ABSTRACT Along with the comprehensive application of the numerical control machine tools,modular fixtures are more and more adopted by manufacturing corporations.Thus,the efficiency and quality of modular fixture design plays a more and more important role in improving product quality and shorten its time coming into market.Meanwhile,manufacturing corporations have accumulated abundant fixture designexperiences in the long time of practice, and an available and effective method is needed urgently to be established by using the valuable knowledge in order to improve modular fixture designing level.This article has made the powerful exploration to modular fixtures CAD in connection with some essential requirements which proposed in view of this topic. In the area of modular fixtures parameterization design based on Solid Works softwares, modular fixtures management systems establishment based on Group Technology and implementation of the modular fixtures’s assembly, this article has made the detailed discussion and the research KEY WORDS: modular fixtures CAD, Solid Works, parameterization design目 录 摘 要 I ABSTRACT II 1 绪论 1 1.1 夹具 1 1.1.1 夹具的一般概念 1 1.1.2 夹具设计的基本要求 2 1.1.3 机床夹具的分类 2 1.1.4 柔性夹具 3 1.1.5 组合夹具 3 1.2 课题的来源及意义 5 1.2.1 课题背景及主要内容 5 1.2.2 国内外对组合夹具CAD的研究 6 1.2.3 课题的意义 8 2 组合夹具元件库的建立 10 2.1 引言 10 2.2 三维建模技术概述………………...………………………...……………...……….10 2.2.1 特征技术概要……………………………………………………………..10 2.2.2 参数化建模…………………………………………………………….….…11 2.2.3 变量化造型理论.............................................................................................11 2.2.4 实体建模……………………………………………………………….….…11 2.3 组合夹具元件几何建模常用方法 12 2.4 组合夹具元件几何建模的关键技术 13 2.4.1 组合夹具元件的自动几何建模原理 13 2.4.2 基于Solidworks配置技术的组合夹具参数化设计 14 2.4.3 基于特征的夹具元件库的建立 16 2.4.4 建立组合夹具元件库模板 17 2.5 通过VB接口的SolidWorks API简介 19 2.6 组合夹具元件信息模型 20 3 基于