《基于UG下的钢丝包装机的虚拟装配设计》.docVIP

设计题目：基于UG下的钢丝包装机的虚拟装配学生姓名： 所在院系： 机 电 学 院所学专业： 导师姓名： 完成时间：摘 要UG是现代计算机辅助设计中应用最广泛的先进三维软件，其功能十分强大。本文介绍了基于UG下的钢丝包装机各零件的造型过程，详细说明了在UG的装配模块对钢丝包装机各零件如滚动滑轮，轴，底座，面板,支架的虚拟装配并制作出工程图，根据装配图对设计的钢丝包装机各零件之间的关系进行检测，看是否存在干涉现象，进一步观察设计的钢丝包装机是否合理，从而提高了钢丝包装机设计的准确性和效率。关键字: UG;参数化设计;三维造型;虚拟装配；工程图Virtual Assembly and Movement Simulationof Steel Wire Automatic Packaging Based on UG Abstract:UG is in the modern computer-aided design applies the most widespread advanced three dimensional software, its function is very formidable. This article introduced based on the UG under steel wire packaging machine various components modelling process, explained in detail in the UG assembly module to the steel wire packaging machine various components like gear, the rolling pulley, the axis, the foundation, supports hypothesized assembly and manufactures the engineering plat, carries on the examination according to the assembly drawing to between the design reduction gear various components relations, looked whether to have the interference, finally through the production steel wire packaging machines movement simulation, further observes the design the reduction gear to be whether reasonable, thus enhanced the steel wire packaging machine design accuracy and the efficiency.Key words: UG; Parametrization design; Three dimensional modelling; Hypothesized assembly; Engineering plat 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc256000000 粹握睽蛭荇扎纾丈衰铆 PAGEREF _Toc256000000 \h 0 HYPERLINK \l _Toc256000001 长淬似鞍冉炕喇淼屑缜 PAGEREF _Toc256000001 \h 2 HYPERLINK \l _Toc256000002 又客犹膛佗扼楠起骓忱 PAGEREF _Toc256000002 \h 2 HYPERLINK \l _Toc256000003 1 绪论邴巧咨帅癍串秃稹柔崧 PAGEREF _Toc256000003 \h 2 HYPERLINK \l _Toc256000004 1.1 CAD的发展过程及现状零堵氨踬唇自瀹哗价番 PAGEREF _Toc256000004 \h 2 HYPERLINK \l _Toc256000005 1.2 基于参数化设计的意义瘭桌寐瓮匮铝颇煞婊擒 PAGEREF _Toc256000005 \h 3 HYPERLINK \l _Toc256000006 1.3 背景及本文所做的工作厄翩捧嫖燠捍借卜倥步 PAGEREF _Toc256000006 \h 3 HYPERLINK \l _Toc256000007 2 基于UG的钢丝包装机设计方案暨睦舾竭硭分菏登煅妪 PAGEREF _Toc256000007 \h 4 H