《机械毕业设计(论文)_修正带上盖注射工艺与模具设计【全套图纸】》.docVIP

毕业设计（论文） 作 者：学 号：系 部：模具技术系专 业：模具设计与制造（CAD\CAM） 评阅者：2012年 5月 摘要全套图纸，加1Abstract Plastics industry is an emerging industry, since several decades after the advent of plastic, plastic source of rich, convenient and low-cost production, metal parts plastic of the developed rapidly, in machinery and electronics, defense, transportation, communication, construction, agriculture, light industry and daily necessities and other industries have been widely used, on the plastic mold requested increase. Therefore, the research injection mold to understand the plastic product the production process and improves the product quality to have the very big significance. This design introduced the basic principle of injection molding, especially the single parting surface of injection mould structure and working principle of injection molding product, puts forward the basic design principle of plastic parts; through the correct analysis of the technology, designed mold two cavity of the plastic mold. Detailed account of the molding parts includes a front template, the former mold, mold, after the mold, after the mold inserts in the design and fabrication process, an important part of the process parameter selection and calculation, the agency launched and pouring system and other structural design process, the comprehensive treatment of the appearance of the product requirements and gate location and demoulding ways between issues, and the tryout and product have been introduced. Key Words: Mold Design and Manufacturing、Conventional Plastic Materials前 言 随着中国当前的经济形势的日趋好转，在“实现中华民族的伟大复兴”口号的倡引下，中国的制造业也日趋蓬勃发展；而模具技术已成为衡量一个国家制造业水平的重要标志之一，模具工业能促进工业产品生产的发展和质量提高，并能获得极大的经济效益，因而引起了各国的高度重视和赞赏。在日本，模具被誉为“进入富裕的原动力”，德国则冠之为“金属加工业的帝王”，在罗马尼亚则更为直接：“模具就是黄金”。可见模具工业在国民经济中重要地位。我国对模具工业的发展也十分重视，早在1989年3月颁布的《关于当前国家产业政策要点的决定》中，就把模具技术的发展作为机械行业的首要任务。?近年来，塑料模具的产量和水平发展十分迅速，高效率、自动化、大型、长寿命、精密模具在模具产量中所战比例越来越大。注塑成型模具就是将塑料先加在注塑机的加热料筒内，塑料受热熔化后，在注塑机的螺杆或活塞的推动下，经过喷嘴和模具的浇注系统进入模具型腔内，塑料在其中固化成型。?本次毕业设计的主要任务是盖注塑模具