《粉末物料螺旋输送机的设计-说明书》.doc

摘 要 螺旋输送机是工业生产中广泛应用的连续输送设备。本文通过对螺旋输送机的性能计算和结构分析，在选择合理驱动装置的同时，对螺旋输送机的各个部件包括旋转轴、螺旋叶片、传动轴、吊轴承等进行设计，对主要的传动轴和螺旋叶片进行了强度校核。设计出了结构简单，尺寸紧凑，满足输送要求的螺旋输送机。为了使螺旋输送机安全运行，同时设计了电气控制装置。 关键词：螺旋输送机，驱动装置，螺旋叶片，吊轴承，安全运行，电气控制 ABSTRACT Screw conveyor is a continuous conveyor, which is widely used in industrial production. Based on the calculation of screw conveyor performance and structural analysis, a reasonable drive is chosen, the various components are designed, including rotary screw conveyor shaft, the helical blade, transmission shaft, hanging bearings and so on. The strength of the main transmission shaft and the helical blade are checked. a screw conveyor with simple structure is designed., The electrical control device is designed for the safe operation of screw conveyor. Key words: screw conveyor, drive, screw conveyor blade, hanging bearing, safe operation, electrical control 目 录 1 绪论-------------------------------------------------------------------------------------------------------------------1 1.1 研究意义-----------------------------------------------------------------------------------------------------1 1.2 国内外发展现状-------------------------------------------------------------------------------------------1 2 总体方案设计-------------------------------------------------------------------------------------------3 2.1 技术方案----------------------------------------------------------------------------------------------3 2.2 主要问题和关键技术------------------------------------------------------------------------------------5 3 螺旋输送机的设计计算-----------------------------------------------------------------------------7 3.1 设计要求-----------------------------------------------------------------------------------------------------7 3.2 螺旋输送机的计算----------------------------------------------------------------------------------------7 4 驱动装置的选择----------------------------------------------------------------------------------------------12 4.1 电机的选用--------------------------------------------------------