Operation Training(KY SPI操作培训资料).ppt

* * * Bridge Error Bridge Error will be detected if minimum solder height (?) is higher than Tolerance Value (Setting Value). Smaller pads and finer pitch pad should have lower Tolerance value. Measured length (?) Tolerance Value (Setting Value) → Bridge Error occurred Distance (?) / Default : 300 um * Shape Error Balance Unit: [um] / Default value: [180um] If the measured Solder Average Height Max Height is bigger than base Tolerance Value, the machine defines it as Error (called Dog ear). (Max Height – Average Height) ≥ Tolerance Value (Setting Value) → Shape Error * Area Error Min Ma