《鼠标上盖注射模具设计》.docVIP

摘 要 鼠标上盖是流线形结构,使用二维绘图难以描述，本课题采用Pro/E软件对鼠标上盖制品及模具进行了三维造型，采用Pro/E的数值模拟技术和经验设计计算相结合的方法优化设计,同时仿真了塑料熔体在型腔内的充模流动以及冷却分析过程，预测了缺陷产生的临界条件，优化了工艺方案及工艺参数，降低了缺陷出现的可能性。利用参数化实体造型的方法，为更加高速、快捷的造型、生产提供了一种切实可行的办法。生成的模型数据可以直接导入数控机床进行三维加工。 关键词:；注塑模具；数值模拟；鼠标上盖 Abstract The top cover of mouse is streamline. So it is difficult to describe by two-dimensional drawing. The product and mold of the top cover of mouse were 3D designed by Pro/E software. An optimized design was made by numerical simulation techniques of Pro/E and experience. The plastic melt flow and cooling process were simulated for