井场作业标准(slam+hdip+fmt+vsp+swc).docVIP

井场作业标准 Wellsite Procedure （slam combination + hdip+fmt+vsp+swc） 到达井场后，井口协助大车司机对好井口，放好垫木，并把所有的源卸下来，设立安全区。 After the crew arrived to the wellsite , operators help drivers line up the wellhead with the Logging truck , and unload the source from the truck to the safety area . 操作工程师向井场监督询问有关数据，把套鞋，井深，仪器重量，测量井段，重复井段的数据放到绞车面板上。 Operating engineer ask the geologist the wellsite information , including the casing shoe depth, TD, instrument weight and length, measured interval , repeat section . 其他人员卸下所有将要下井的仪器和井口设备线。 All the other person unload the primary downhole tools and all the cable , including T