本科毕业论文---水果削皮机的工业工程设计.docVIP

本科毕业设计(论文) 题目： 院 （系）： 专 业： 班 级： 学 生： 学 号： 指导教师： 2015年 月 摘 要 关键词： Abstract For the design of apple peeler each function unit ,the first step,the design background is analyzed, the advantages and disadvantages of the research status are understood. The most reasonable transmission system solution to realize the function of the set function requirements is determined through analysis and comparison. Finally combining human factors engineering related to theory knowledge, the mechanism of the main parameters and structural dimension are designed in detail.The entire system ingeniously design simple mechanical , compact structure, stable performance, change the operation mode of traditional fruit peeler’s a single feature and peeled ineffective completely. The main content of the design include: （1）Finalize the whole plan: based on the ergonomics principles, the optimized design including the insert fruit mechanism, peel mechanism, slicing to the core mechanism, fixing mechanism, the feed components and rack are carried out. （2）Feed mechanism design: referring to the principle of the lathe turning workpiece, transverse feed by handle, connecting rod, feed shaft fork and knife of peel can meet the requirements well. ? （3） Mechanism design for peeling and piting : peeling mechanism composed of spring, cutting tool base, peeling knives can be cut and fit well, and peel thickness and width is adjustable, it is well done by cutting the peel of content, to nuclear and slice with sliced to nuclear tool, through changing the cutting tool can also realize wire cutting, completely changed the present situation of previous peeler’s single function and not satisfy the daily requirements. （4）Design of fixed mechanism: this machine adopts the principle of chuck fixed and connects the suction cups to the base, uses the pendulum motion of bending rocker to realize the machine