Energyplus例子的中文说明.doc

E+例子的中文说明 输入文件 ! VAVSingleDuctReheat.IDF ! Basic file description: Basic test of a very simple VAV system. This file is more or less ! identical to the TermReheat.idf file except that a VAV fan has ! replace the constant volume fan and dampers with controls have ! been added to the zone equipment loop. ! Run: 2 design days. ! Building: Fictional 3 zone building with interzone partitions connecting all zones together. ! No ground contact (all floors are partitions). Roofs exposed to outdoor environment. ! Note that this file has one single pane window for testing the new daylighting mods. ! Internal: People, equipment, and lighting all at approximately normal levels and schedules. ! System: 3 zone variable air volume system using a single air loop. Controlled about like the old BLAST NWS2 control profile. Heating up to 20 C during occupied hours, 15 C otherwise. ! Cooling to 24 C while occupied, 30 C otherwise. Fans and coils scheduled to be unavailable during unoccupied hours. Cooling coil off all winter. Reheat coil on all year. ! System configuration is very basic--air loop has a fan and cooling coil, each zone leg has nothing more than a reheat coil. ! Plant: Heating loop served by purchased heating. Cooling loop served by two different types of chillers and purchased cooling. Priority based controls determine which piece of equipment tries to meet the load. ! SolDis=FullInteriorAndExterior, Aniso, Detailed Interior and Exterior Convection 一、模拟参数－simulation parameters Version 此处允许你输入你所使用的IDF的正确的版本号。如果输入版本号与实际使用的不同将显示出现严重错误。 Building North Axis 从真正的北向到建筑北向的度数 Load convergence(收敛) tolerance Value 缺省为0.4 该值表示：在收敛达到之前负荷必须满足的值 Temperature convergence(收敛) tolerance Value 缺省为0.4 该值表示：在收敛达到之前区域温度必须满足的值 Solar Distribution 太阳辐射通过外窗进入室内的形式 三个选项：Minimal shadowing:除了门和窗外，无外部的遮阳，最小阴影的情况认为太阳的辐射全部的落到地板上并被吸收 FullExterior：有外遮阳