unit13 夹具与固定装置_图文.pptVIP

Professional English（13） 北华大学机械学院 王开宝 Unit 13 Jigs and Fixture钻模与夹具 Introduction 导言 It has already been stated that the workpiece must be located relative to the cutting tool, and be secured in that position. After the workpiece has been marked out, it is still necessary to position it with respect to the machine movements, and to clamp it in that position before machining is started. 已经说明了工件必须相对于切削刀具定位并确保到位。工件划线后，仍有必要将其相对于切削运动定位，并在机加工开始前把它装夹到位。 When several identical workpieces are to be produced the need to mark out each part is eliminated by the use of jigs and fixtures, but if a