本科毕业论文—基于单片机的直流稳压电源的设计.docVIP

  • 4
  • 0
  • 约1.82万字
  • 约 45页
  • 2016-12-21 发布于辽宁
  • 举报

本科毕业论文—基于单片机的直流稳压电源的设计.doc

毕业设计论文 基于单片机的直流稳压电源的设计 摘要 几乎都旋纽开关调节电压,调节精度不高而且经常跳变,使用麻烦。数控电源目前的发展,主要朝着更高的数控精度和分辨率及更好的动态特性;更好的环保性能;智能化与高可靠性;更广泛的应用方向发展。本设计利用AT89S51作为主控芯片,控制数模转换模块DAC0832的输出电压,通过放大器OPA552放大输出。设置四个按键,来实现电压的增减,并带有数码显示模块。电流可以达到200mA。关键词数控电源AT89S51;DAC0832;OPA552 Abstract Direct current voltage-stabilized power supply is one of the commonly used equipment in electronic technology. It’s widely used in teaching, researching and other fields.Most of the traditional direct current voltage-stabilized power supply use the knob switch to adjust the voltage.It has the trouble of low-precision and difficult to control.

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档