热膨胀测量.pptVIP

Why Shaft Alignment? Studies over the past ten years indicate that 50% of all machine breakdowns are due to poor alignment. Some surveys indicate that up to 90% of all machines run outside their recommended tolerances. Rotational centers All shafts, whether they are straight or bent, rotate on an axis called the rotational center. The rotational center forms a straight line. Misalignment Shafts are misaligned when the two shafts are not collinear. Types of misalignment Offset misalignment Angular misalignment Measuring Misalignment Viewed from the top - Horizontal Misalignment View