双联齿轮的注射模具.docVIP

摘 要 本次的设计任务是设计双联齿轮的注射模具，由于该制品形状中等复杂，并且塑料壁较薄。故模具不但要求满足制品的工艺性，同时也要求在满足制品几何尺寸精度的前提下，力求提高模具的寿命、降低模具成本、提高生产效率。本文通过对双联齿轮塑件的结构特点的分析，介绍了设计双联齿轮模具要点，对特殊、复杂部位的设计作了详细阐述，采用了pro/e方法来设计双联齿轮。 在设计过程中采用如pro/engineer、AutoCAD、Caxa等软件,进行了平面图的绘制，实体的造型和设计，并且对制件成型性能进行了分析，为了更直观的体现模具的开合模过程， 用Pro/engineer对模具进行了实体造型和动画仿真，通过这些先进的工艺方法，获得了更精确的模具，并且缩短了生产周期。 关键词：双联齿轮；塑料注射模；模具设计 ABSTRACT The design mission of this time is need to design a set of Phone shell injection mold. The shape of phone shell is not complex, and the plastics wall is thinner, so the mould not only needs to meet with the needs of technology products, but also should improve the service life of die, lower the mold cos and raisse the e production efficiency on the premise of meeting with the size accuracy. This paper adopts a methodology of PRO/E to design the mould. Through the analysis of the structure characteristic of the Phone shell, the main design points of the injection mould for it were introduced, and the design of the special and complex parts of the mould was stated in detail. The design of this time adopts some softwares, such as CAXA, pro/ engineer, AutoCAD etc. , carries on the plane chart to survey and map, the design of the entity, and carries on the analysis of the moulds function. In order to reflect more intuitive mold opening and matching process, the entity shape and animations imitation were carried on by Pro/ engineer. Accordingly, the more accurate mould was acquired, and shortened the produce period was shortened. 目录 摘要 ……………………………………………………………………………I Abstract ……………………………………………….………………………II 第1章 绪论……………………………………………………………………4 1.1 模具在加工工业中的地位…………………………………………………………...4 1.2 模具的发展趋势……………………………………………………………………...4 1.3 设计在学习模具制造中的作用……...............……………………………………………….…...5 第2章 塑件的成型工艺性…………………………………………………6 2.1 塑件材料的选择及结构分析……………………………………………………...6 2.2 PA6 的注射成型工艺……...……………………………………………………..6 2.2.1 注射成型工艺过程…………………………………………………………….6 2.2.2 PA6 的注射成型工艺参数…………………………………………………….6 2.3 PA6 性能分