福特公司DV--PV培训教材资料.ppt

DESIGN VERIFIACTION PRODUCTION VALIDATION PARTICIPANT GUIDE Root Cause of the Belt Slip 皮带打滑的根本原因 As part of their review, the team reviewed a Global 8D completed previously on the belt slip problem. The root cause of the belt slip problem was identified as being due to a combination of Noise factors. In particular, the root cause was found to be a combination of two Noise factors; Piece-to-Piece Variation and Changes Over Time. Belts produced at the upper end of the length specification were tending to slip as the functional performance of the