桥梁设计毕业设计(交通大学).docVIP

摘 要 本设计为预应力混凝土连续梁桥的设计，桥式布置为420m、连续空心板梁，梁高90cm，桥面宽度12.5m；双柱式桥墩桩基础。 Abstract This paper is the design of the PC continuous beam. which is located at Jiuquan , the 420m spans and simply—continuous hollow slab -beams is laid to the form of the bridge, the height of the beam is 90 cm, the width of the pavement is 12.5 m, the pile foundation. The upper rpart of the bridge are calculated in this design, basing on the condition of the line, there are four spans,three piers and two abutments on the bridge. The dimension of the section is referred to the demand of the design, then the structure’