Baseoil150bs.docVIP

CSLC: HVI 650(150BS) PAGE: 1 OF 1 DATE:2008/06/30 INSTRUCTION FOR STORING AND HANDLING STORAGE: Pumping, recommended: 55℃ - 60℃, Maximum: 70℃ Blending in base oil, Temp., recommended: 45℃ - 50℃, Maximum: 70℃ Long-Term storing, Maximum: 49℃ Avoid overheating or contamination by water Large product quantities are usually stored in tanks of various constructions, made of carbon steel; smaller quantities are stored in barrels and drums. Corrosion of tanks must be prevented by protective coating, etc. Barrels and drums should be stored under a roof to prevent the effect of sunshine. HANDLING: As a standard practice, CSLC recommends the use of rubber gloves and goggles when handling this material. The agent is toxic orally and irritate to the eyes and skin, and contact with the agent should be avoided. MATERIAL SAFETY DATA SHEET CREATED: 1993/03/07 REVISED: 2008/06/30 Page 1 SECTION 1 CHEMICAL PRODUCT COMPANY IDENTIFICATION TRADE NAME: HVI 650 SYNONYM: Lubricant mixture CHEMICAL FAMILY: Petroleum Hydrocarbon CAS NUMBER: 64742-57-0 UN/NA NUMBER: -- SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS COMPONENT: HVI 650 A complex mixture of petroleum hydrocarbons ADDITIVES: None SECTION 3 HAZARDS IDENTIFICATION NFPA RATINGS (SCALE 0-3): HEALTH=1 FIRE=1 REACTIVITY=0 CARCINOGEN STATUS: Not available The toxicity of HVI 650 has not been fully quantified. The major sites affected by petroleum derived oils are the lungs and skin. SECTION 4 FIRST AID MEASURES INHALATION: Remove from exposure area to fresh air immediately. If breathing has stopped, perform artificial respiration. Keep person warm and at rest. Treat symptomatically and supportively. Get medical attention immediately. SKIN CONTACT: Remove contaminated clothing and shoes immediately. Wash affected area with soap or mild detergent and large amounts of water until no evidence of chemical remains (approximately 15 - 20 minutes). Get medical attention immediately. EYE CONTAC