beam普通钢筋(70kN)ansys命令流.docVIP

FINISH /clear,start /filname,Model beam70kN /title, Analysis of Model beam(70kN) /config,nres,2000 csys,0 !混凝土采用65单元和钢筋采用8单元 /prep7 !定义C50混凝土solid65单元 et,1,solid65, !K1=0,k7=1 *afun,deg KEYOPT,1,7,1 r,1,3,0,0,0,4,0.003,90,0,4,0.003,90,90 mp,ex,1,4.298e10 mp,nuxy,1,0.2 Mp,dens,1,2600 tb,concr,1,1 TBTEMP,0 TBDATA,,0.5,0.95,3.58e6,-1,0,0 TBDATA,,0,0,0.6,,, tb,MISO,1,1,15 TBPT,,0.00025TBPT,,0.0005TBPT,,0.00075TBPT,,0.001TBPT,,0.00125TBPT,,0.0015TBPT,,0.001873TBPT,,0.002TBPT,,0.00225TBPT,,0.0025TBPT,,0.00275TBPT,,0.003TBPT,,0.00325TBPT,,0.0035TBPT,,0.003586 !定义钢绞线link8单元 yyl=1200e6 L=1 deltL=yyl*L/1.95e11 istrn=deltL/(deltL+L) alph=1e-5 ET,2,LINK8 R,2,2.8e-4,istrn MP,EX,2,1.95E11 MP,NUXY,2,0.3 Mp,dens,2,7800 TB,BKIN,2,1 TBTEMP,0 TBDATA,,1860e6,0.0 !定义纵向普通钢筋link8单元 ET,3,LINK8 R,3,7.85e-5*2 MP,EX,3,2E11 MP,NUXY,3,0.3 Mp,dens,2,7800 TB,BKIN,3,1 TBTEMP,0 TBDATA,,335e6,0 !定义箍筋link8单元 ET,4,LINK8 R,4,2.83e-5 MP,EX,4,2.1E11 MP,NUXY,4,0.3 Mp,dens,2,7800 TB,BKIN,4,1 TBTEMP,0 TBDATA,,335e6,0 !支座处的混凝土,不考虑开裂 et,5,solid65 R,5,3,0,0,0,4,0.003,90,0,4,0.003,90,90 mp,ex,5,4.298e10 mp,nuxy,5,0.2 Mp,dens,5,2600 tb,concr,5,1 TBTEMP,0 TBDATA,,0.5,0.95,-1,-1,0,0 TBDATA,,0,0,0.6,,, !define cross section parameter w1=0.2 !width of the bottom web w2=0.3 !width of the upper web w21=0.05 !width of the left wing w22=0.05 !width of the right wing w3=0.05 !width of the flang !---------------height of the section at diferent level h1=0.05 h2=0.05 h3=0.16 h4=0.03 h5=0.05 k,1,w1/2 k,2,kx(1),h1 !kx(1)指关键点1的x坐标 k,3,w1/2,ky(2)+h2 k,4,kx(3),ky(3)+h3 k,5,kx(4)+w22,ky(4)+h4 k,6,kx(5),ky(5)+h5 k,7,kx(4),ky(6) k,17,-kx(4),ky(7) k,16,-w21-w1/2,ky(6) k,15,kx(16),ky(5) k,14,-kx(4),ky(4) k,13,-kx(3),ky(3) k,12,-kx(2),ky(2) k,11,-kx(1),ky(1) ksel,s,,,1,17,1 cm,end,kp kgen,2,end,,,,,-0.32,100 !复制关键点向z方向移动-0.32 cmsel,s,e