S7-200CATALOGENGLISH.doc

S7-200 Specifications A Chapter Overview Section Description Page A.1 General Technical Specifications A-2 A.2 Specifications for the CPU 221, Firmware Release 1.1 A-6 A.3 Specifications for the CPU 222, Firmware Release 1.1 A-11 A.4 Specifications for the CPU 224, Firmware Release 1.1 A-16 A.5 Specifications for the CPU 226 A-21 A.6 Specifications for the EM 221 Digital Input Module A-26 A.7 Specifications for the EM 222 Digital Output Modules A-28 A.8 Specifications for the EM 223 Digital Combination Modules, 4 Inputs/4 Outputs A-30 A.9 Specifications for the EM 223 Digital Combination Modules, 8 Inputs/8 Outputs A-33 A.10 Specifications for the EM 223 Digital Combination Modules, 16 Inputs/16 Outputs A-36 A.11 Specifications for the EM 231, EM 232, and EM 235 Analog Input, Output, and Combination Modules A-39 A.12 Specifications for the EM 277 PROFIBUS–DP Module A-50 A.13 Specifications for the EM 231 Thermocouple and EM 231 RTD Modules A-67 A.14 CP 243–2 Communications Processor A-85 A.15 Optional Cartridges A-88 A.16 I/O Expansion Cable A-89 A.17 PC/PPI Cable A-90 A.18 Input Simulator A-93  A.1 General Technical Specifications National and International Standards The national and international standards listed below were used to determine appropriate performance specifications and testing for the S7-200 family of products. Table A-1 defines the specific adherence to these standards. Underwriters Laboratories, Inc.: UL 508 Listed (Industrial Control Equipment) Canadian Standards Association: CSA C22.2 Number 142 Certified (Process Control Equipment) Factory Mutual Research: FM Class I, Division 2, Groups A, B, C, D Hazardous Locations, T4A. Class I, Zone 2, IIC, T4. Group and Temperature ratings are referenced to a 40C ambient operating environment. VDE 0160: Electronic equipment for use in electrical power installations European Community (CE) Low Voltage Directive 73/23/EEC EN 61131–2: Programmable control