Thesealingperformanceandgoodbondingperformance.docVIP

The sealing performance and good bonding performance. Have certain temperature how softening temperature is not lower than 65 degrees Celsius, The summer does not soften, no bubbles, no flow; Frost to hold to a certain among, the winter is not brittle, no crack, don t fall off. 3. The chemical stability is good, when using, not volatilize harmful gases, and may not produce corrosion of thermal barrier materials and protective coating material or dissolved. 3. The chemical stability is good, when using, not volatilize harmful gases, and may not produce corrosion of thermal barrier materials and protective coating material or dissolved. 4. FC with wide temperature range. 4. FC with wide temperature range. 5. The drying time is shorter, at room temperature can be directly used, construction is convenient. 5. The drying time is shorter, at room temperature can be directly informs, construction is work. 6. Have flame retardant effect, oxygen index should not be less than 30%. 6. Have flame retardant effect, oxygen index should not be less than 30%. Seven, the outer layer material performance requirements Seven, the outer layer material performance requirements 1. The density is small, good chemical stability, not easy to burn. 1. The density is small, good chemical stability, not easy to burn. Covering material combustion performance shall be not less than the national standard of the building materials and products of combustion classification performance GB8624 in class C R for storage or transport of flammable, explosive materials equipment and pipeline, and its adjacent pipelines, the combustion performance of the protective material shall be not less than A2 level. Covering material combustion performance shall be not less than the national standard of the building materials and products of combustion classification performance GB8624 in class C R for storage or transport of flammable, explosive materials equipment and pipeline, and its adjacent pipeli