《一起来配置MA5680T.ppt

vlan 100 smart 使用实例 举例：增加VLAN 10并进入VLAN模式。 huawei(config)#vlan 2 standard Command: vlan 2 standard 举例：增加VLAN 5～VLAN 10。 huawei(config)#vlan 4,7-9 standard Command: vlan 4,7-9 standard It will take several minutes, and console may be timeout, please use command idle-timeout to set time limit Are you sure to add VLANs? (y/n)[n]:y 举例：删除VLAN 10。 huawei(config)#undo vlan 10 Command: undo vlan 10 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. vlan 100 smart 输出说明 当成功增加或删除单个VLAN时，系统无提示 当成功增加或删除多个VLAN时，系统显示“The total of the added VLANs is x(或The total of the deleted VLAN(s) is x)”。实际输出时，其中的“x”会用实际增加或删除的VLAN个数代替。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. port vlan 100 0/18 0 命令功能 port vlan命令用于增加VLAN上行端口。为了使带VLAN的用户报文通过上行端口上行，需要将此上行端口加入VLAN中。增加VLAN上行端口成功后，带此VLAN的报文能通过此端口上行。 undo port vlan命令用于删除VLAN上行端口。为了阻止带VLAN的用户报文通过上行端口上行，需要将此上行端口从VLAN中删除。删除VLAN上行端口成功后，带此VLAN的报文不能通过此端口上行。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. port vlan 100 0/18 0 命令格式 port vlan vlanid [ to end-vlanid ] frameid/slotid portlist port vlan vlan-list frameid/slotid portlist undo port vlan vlanid [ to end-vlanid ] frameid/slotid portlist undo port vlan vlan-list frameid/slotid portlist Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. port vlan 100 0/18 0 使用指南 VLAN必须已经使用vlan命令建立好。 以下情况不能删除VLAN包含的端口： 该VLAN已经使用native-vlan命令设置为端口的缺省VLAN。 该VLAN已经使用mac-address static命令在端口上配置了静态MAC地址。 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. port vlan 100 0/18 0 使用实例 举例：VLAN 10增加上行端口0/19/0。 huawei(config)#port vlan 10 0/19 0 Command: port vlan 10 0/19 0 举例：VLAN 10删除上行端口0/19/0。 huawei(config)#undo port vlan 10 0/19 0 Command: undo port vlan 10 0/19 0