Cisco Presentation Guide思科表示指南.ppt

CCNA 4 v3.1 Module 2WAN Technologies Purpose of This PowerPoint This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.1. It was created to give instructors a PowerPoint to take and modify as their own. This PowerPoint is: NOT a study guide for the module final assessment. NOT a study guide for the CCNA certification exam. Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link. To Locate Instructional Resource Materials on Academy Connection: Go to the Community FTP Center to locate materials created by the instructor community Go to the Tools section Go to the Alpha Preview section Go to the Community link under Resources See the resources available on the Class home page for classes you are offering Search Contact your parent academy! Objectives WAN Technology WAN Service Providers Physical Layer: WANs WAN Line Types and Bandwidth WAN Devices CSU/DSU Modem Transmission WAN Standards WAN Encapsulation WAN Data-Link Protocols Circuit Switching Packet Switching WAN Link Options WAN Link Options Analog Dialup ISDN ISDN Leased Line Leased lines are not only used to provide direct point-to-point connections between Enterprise LANS, they can also be used to connect individual branches to a packet switched network. WAN with X.25 X.25 provides a low bit rate, shared-variable capacity that may either be switched or permanent Frame Relay Most Frame Relay connections are based on PVCs rather than SVCs. It implements no error or flow control. This leads to reduced latency. Frame Relay provides permanent shared medium bandwidth connectivity that carries both voice and data traffic. ATM Asynchronous Transfer Mode (ATM) is a technology capable of transferring voice, video, and data through private and public networks. It is built on a cell based architecture rather than on a frame-based architecture. DSL ADSL Technology Cable Modem Enhanced Cable Modems enable two-way. High speed data transmi